KINEMATICS OF MACHINERY

Aryabhatta Knowledge University

KINEMATICS OF MACHINERY

  Sem. iv   2013                                    Time 3hr                        Full marks: 70

Attempt any five questions in which question no 1 is compulsory

1.       Choose the correct answer(any seven):

(a)    In a centrifugal method casting method

(i)                  Core is made of sand

(ii)                Core is made of ferrous metal

(iii)               Core may be made of any metal

(iv)              No core is used

(b)   The  binder in the case of synthetic sand ,is

(i)                  Water

(ii)                Clay

(iii)               Molasses

(iv)              Bentonite and water

(c)    Carburettors are manufactured by

(i)                  Fine sand casting

(ii)                Die casting

(iii)               Slush casting

(iv)              Shell moulding

(d)   In metals subjected to cold working condition ,strain hardening effect is due to____

(i)                  Slip

(ii)                Twinning

(iii)               dislocation

(iv)              fracture

(e)   A forging method for reducing the diameter of a bar and in the process making it longer

Is termed as

(i)                  Fullering

(ii)                Punching

(iii)               upsetting

(iv)              stamping

(f)     the brazing joint can be satisfactorily made on an article made of

(i)                  tin

(ii)                copper

(iii)               aluminium

(iv)              galvanized sheet

(g)    the electric resistance welding operates with

(i)      low current and high voltage

(ii)    low current low voltage

(iii)   high current low  voltage

(iv)  high current and high voltage

(h)   in MIG welding ,the metal is transformed in the form of

(i)      molecules

(ii)    fine spray of metal

(iii)   weld pool

(iv)  molten drops

(i)      injection moulding process is suitable for

(i)      thermosetting plastic

(ii)    thermoplastics

(iii)    both of the above

(iv)  None of the above

(j)     High speed gears are made from plastic of the type of

(i)                  Foalite

(ii)                Fibreglass

(iii)               Capron

(iv)              Polyethylene

2.       (a)   What are the advantages of casting process over other shaping process?

(b)   Write the uses of (i) gates ,(ii) riser ,(ii) core and (iv) chills

(c) On what factors , the selection of a suitable  core sand depends?

3.       What do you understand by ‘centrifugal casting’? describe the process of true centrifugal casting with the help of a neat diagram. What are its advantages and disadvantages?

4.       (a) What are crucible furnaces? where are they preferred and why?

(b) What are the major drawbacks of the casting process and how are they overcome?

5.       (a) What is a continuous rolling mill ?what are its advantages?

(b) What is hot extrusion? In how many ways it can be performed ? discuss their merits and demerits.

6.       (a) What is a coated electrode? Sketch the arc flame due to such an electrode and explain the different functions of the coating.

(b) Explain oxyacetylene welding.

7.       Describe any two of the following welding process with their advantages and disadvantages

(a)    TIG welding

(b)   Thermite welding

(c)    Electron beam welding

8.       (a) Describe the principal of powder metallurgy and how powder is produced.

(b)   Explain the process of sintering

9.       (a) How do thermosetting plastics differ from thermoplastics?

(b) Describe with neat sketch ,the plastic processing method of injection moulding. Also write its advantages and applications.

HYDRAULICS AND OPEN CHANNEL FLOW

Aryabhatta knowledge university

  Sem. iv   2013                               Time 3hr                            Full marks: 70

HYDRAULICS AND OPEN CHANNEL FLOW

Attempt any five question in which question no 1 is compulsory

1.       Answer any seven from the following in short in short ,preferably one or two sentences each:

(a)    What is hydraulics?

(b)   What is boundary layer thickness?

(c)    What type of flow is (i) breaking of dam, (ii) spreading of irrigation of water on a field?

(d)   What is specific energy?

(e)   What is critical depth?

(f)     What is Darcy-weisbach frication factor?

(g)    What is sequent depth ratio?

(h)   What is weak jump ?

(i)      What is backwater curve?

(j)     What is surge in unsteady flow?

2.        (a) define boundary layer and derive the expression for displacement thickness, and momentum

(b) a thin rectangular plate 2.25 m long and 12.5 m wide is towed through water ,having v=1.48*10^-6 m²/s, at 1.0 m/s velocity. Determine the total drag force on  both sides of the plate.

3.        (a) what do you mean by critical flow? Derive an expression for critical depth and Froude number for triangular channel.

 (b) A rectangular channel is 3.0 m wide and carries a discharge of 15.0 m³/s at a depth of 2.0 m. At a certain section of the channel, it is proposed to reduce the width to 2.0 m  and to alter the bed elevation by Δz to obtain critical flow at contracted section without altering the upstream depth. What should be the value of Δz?

4.       (a) explain the cause of channel in transition with a hump in a sub critical flow.

(b) A rectangular channel 3.6 m wide had a widely damaged surfaces and had a Manning’s n= 0.03. As a first phase of repair , what is the increase of discharge obtained as a result of repair?

5.       (a) sketch the possible GVF profiles in the serial arrangement of channels,if the flow is from left to right : (i) free intake –steep –sluice gate—mild slope,

(ii) mild—sluice gate –steep—horizontal—sudden drop.

(b) A channel has a multiple –roughness types in its perimeter .Assuming that the total discharge in the channel is equal to the sum of the discharges in the partial areas , show that the equivalent roughness is given by

                                      N=(PR^5/3)/₁ⁿΣ(P_iR_i^5/3/n_i)

6.       (a) Derive the equation for gradually varied flow and write the basic assumptions in analyzing the GVF.

(b) Water flows in 15 m wide rectangular channel at arate 115 m³ /s . bed Slope is 0.001 and n=0.125. A dam placed  downstream raises the height to 6.8 m  immediately behind the dam. What is the distance upstream to a point , where depth is 3.7 m? Find by two steps.

7.       (a) derive the equation for sequent –depth ratios and energy loss in exponential channels having A =K₁ y^a  in which k₁  and a are characteristic constants.

(b) A rectangular channel carrying a supercritical stream is to be provided with a hydraulic jump type of energy dissipation. If it is desired to have an energy loss of 5 m in the jump when the inlet Froude number is 8.5,determine the sequent depths.

8.       (a) define the celerity of a gravity wave and derive its equation for rectangular channel.

(b) A 2.5 m wide rectangular channel is carrying a flow depth of 2 m. Determine the height of a  surge  wave and its velocity if the discharge is suddenly increase to 10 m³/s at the upstream end.

9.       Write short notes on any four of the following :

(a)    Economical channel section

(b)   Sseparation of boundary laye

(c)    Specific energy curve

(d)   Factors affecting mannin’s n

(e)   Types of hydraulic jump

                                                                                                                                ^{techprojecthelper.blogspot.in}

aku thermodynamics question paper

Aryabhatta knowledge university

  Sem. iv   2013                               Time 3hr                            Full marks: 70

Thermodynamics                        

Attempt any five question in which question no 1 is compulsory

1.       Choose the correct answer (any seven):

(a)    In case of free expansion between state -1 and state -2 ,which of the following is correct considering no heat interaction?

(i)                  U₁ =U₂

(ii)                W_1-2 =0

(iii)               Q_1-2 =0

(iv)              All of the above

(b)   The latent heat of vaporisation with increase in pressure of water

(i)                  Increases

(ii)                Remains constant

(iii)               Decreses

(iv)              None of the above

(c)    As differentials heat and work would be described mathematically as

(i)                  Inexact

(ii)                Exact

(iii)               Discontinuity

(iv)              Point function

(d)   Heat is being supplied to air in a cylinder fitted with a frictionless piston held by a constant weight, the process is

(i)                  Isochoric

(ii)                Isobaric

(iii)               Adiabatic

(iv)              Isothermal

(e)   Expansion of hot gases in an IC engine can be approximated to an

(i)                  Isochoric

(ii)                Isobaric

(iii)               Adiabatic

(iv)              Isothermal

(f)     A refrigerator and a heat pump operate between same temperature limits. If the COP of refrigerator is 4, then the COP of heat pump is

(i)                  3

(ii)                4

(iii)               4.4

(iv)              5

(g)    A relation of vapour to enthalpy of vapourisation is expressed in

(i)                  van der walls equation

(ii)                Maxwell equation

(iii)               Carrier equation

(iv)              Clausius-clapeyron equation

(h)   For same maximum pressure and temperature among Otto , diesel and dual cycles

(i)                  diesel cycle is most efficient

(ii)                 Otto cycle is most efficient

(iii)                dual cycle is most efficient

(iv)              None of the above

(i)      Thermal efficiency of rankine cycle can be improved by steam

(i)      Reheating

(ii)     super heating

(iii)   Regeneration

(iv)  None of the above

(j)     The process of removing moisture from air at constant dry bulb temperature is known as

(i)                  Sensible heating

(ii)                Sensible cooling

(iii)               Dehumification

(iv)              Humidification

2.       (a) define internal energy. Show that internal energy is a property of a system.

(b) a cylinder contains 0.12 m³ of air at 1 bar and 90°c .It is compressed to 0.03 m³ .The final pressure being 6 bar .Find the index of compression, increase in internal energy and heat transferred. Take R= 0.287 KJ/kg-K and C_v=0.717KJ/kg-K

3.       (a)  prove the Kelvin planck and Clausius statement of the second law of thermodynamics are equivalent to each other.

(b)  A reversed Carnot Cycle operating as a refrigerator has a capacity of 100 KJ/s while operating  between temperature limits of -20°c and 35°C. Determine (i) power input and (ii) COP . What would be its efficiency if it runs as an engine?

4.       (a)  state and prove Clausius inequality.

(b)  During isothermal heat addition process of a Carnot cycle, 800 KJ heat is added to the working fluid from a source of 527°c. Determine  (i) change in entropy of the working fluid , (ii) change in entropy of the source and (iii)  total entropy change during the process.

5.       (a)  define the following:

(i)                  Pure substance

(ii)                Saturation point

(iii)               Triple point and critical point

 (b) A vessel of volume 0.04m³ contains a mixture of saturated water and saturated steam at temp  of 250°C. The mass of liquid is 9 kg . Find the enthalpy and the internal energy .

6.       In an air -standard dual cycle, the pressure and temperature at beginning of compression are 1 bar and 57°C respectively. The heat supplied in the cycle is 1250 KJ/kg, two third of this being added at constant volume and rest at constant pressure. If the compression ratio is 16, determine the air-standard efficiency.

7.       (a) give limitation of carnot vapour power cycle and explain how Rankine cycle helps in overcoming them.

(b) A stem power plant running on Rankine cycle has steam entering HP turbine at 20MPa, 500°c and leaving LP turbine at 90% dryness. Considering condenser pressure of 0.005 MPa and reheating occurring up to the temperature of 500°C , determine  the thermal efficiency of the cycle.

8.       (a) what do you mean by dry bulb and wet bulb temperatures? When do d.b.t. ,w.b.t.and d.p.t. become equal?

(b) 10 m³ /min of air at 1 atm and 20°C with 90% RH is mixed with 20 m³  /min of air at 1 atm and 40°C with 20% Rh. Calculate the resulting state of mixture.

9.        (a) Explain Maxwelll relation in thermodynamics .

(b) A gaseous mixture consists of 1 kg of oxygen and 2 Kg of nitrogen at a pressure of 150 Kpa and a temperature of 20°C . Determine the change in internal energy and enthalpy of the mixture when the mixture is heated to a temperature of 100°C (i) at constant volume and (ii) constant pressure.